Milling

Written by Administrator | 11 August 2008

We offer a sanding and bitumen removal service here on site.
We can supply you with your parquet flooring clean and ready to fit with minimum preparation.
We simply take each individual floor block and remove the bitumen from the rear. This will leave you with a smooth and clean surface on the rear. Basically we take the blocks right back to the bare wood. This makes them easier to fit and saves you time having to scrape excess bitumen from the backs of the blocks. This will cost you an extra £2.00 per square yard on top of the cost of your blocks.

We can also remove the tongues from the blocks. Basically we transform a tongue and grooved block in to a straight edge block. This makes them easier to fit and saves you having to clean out the grooves of the blocks to enable them to fit tight together. This will cost you an extra £2.00 per square yard on top of the cost of your blocks.

We can also pre sand the tops of the parquet flooring blocks for you. We simply sand each individual block for you, removing the original varnish, stain or wax. This in turn saves you time, cost, effort when you come to sand the parquet flooring. Please note: the parquet flooring will still require sanding once they are fitted. Our pre sanding method will just save you time and also sanding belts as your belts will not clog up with the varnish and there will also be much less dust and your sanding time will be cut by more than half.
This will cost you an extra £2.00 per square yard on top of the cost of your blocks.

If you wish to take advantage of our milling service please advise us when placing your order.